In this week’s class we will learn the basics of version control, so that you can work on your final projects in a clean folder with a single set of files, but can save snapshots of versions of your work at each point and return to them if necessary.
This avoids the hell of having to search through multiple versions of similar files. That, as Ben Welsh of the Los Angeles Times explains in this video, legendary in data journalism circles as “Ben’s rant,” is nihilism!
Version control was invented for programmers working on complex coding projects. But it is good practice for any project — even if all you are managing are versions of a simple website, or a series of spreadsheets.
The version control software we will use is called Git. It is installed automatically when you install and configure GitHub Desktop. GitHub Desktop is a point-and-click GUI that allows you to manage version control for local versions of projects on your own computer, and sync them remotely with GitHub. GitHub is a social network, based on Git, that allows developers to view and share one another’s code, and collaborate on projects.
Even if you are working on a project alone, it is worth regularly synching to GitHub. Not only does this provides a backup copy of the entire project history in the event of a problem with your local version, but GitHub also allows you to host websites. This means you can go straight from a project you are developing to a published website. If you don’t already have a personal portfolio website, you can host one for free on GitHub.
Download the files for this session from here, unzip the folder and place it on your desktop. It contains the following folders and files:
index2.html Two simple webpages, which we will edit and publish on GitHub.
js Folders with files to run the Bootstrap web framework.
repoThink of this as a folder for a project. A repository contains all of the project files, and stores each file’s revision history. Repositories on GitHub can have multiple collaborators and can be either public or private.
cloneCopy a repository from GitHub to your local computer.
masterThis is the main version of your repository, created automatically when you make a new repository.
branchA version of your repository separate from the master branch. As you switch back and forth between branches, the files on your computer are automatically modified to reflect those changes. Branches are used commonly when multiple collaborators are working on different aspects of a project.
pull requestProposed changes to a repository submitted by a collaborator who has been working on a branch.
mergeTaking the changes from on branch and applying them to another. This is often done after a pull request.
syncSubmitting your latest commits to the remote responsitory, on GitHub and syncing any changes from there back to your computer.
gh-pagesA special branch that is published on the web. This is how you host websites on GitHub. Even if a repository is private, its published version will be visible to anyone who has the url.
forkSplit off a separate version of a repository. You can fork anyone’s code on GitHub to make your own version of their repo.
Here is a more extended GitHub glossary.
Navigate to GitHub and sign up:
Choose your plan. If you want to be able to create private repositories, which cannot be viewed by others on the web, you will need to upgrade to a paid account. But for now select a free account and click
At the next screen, click the
skip this step link:
Now view your profile by clicking on the icon at top right and selecting
Your profile. This is your page on GitHub. Click
Edit profile to see the following:
Here you can add your personal details, and a profile picture. For now just add the name you want to display on GitHub. Fill in the rest in your own time after class.
You should have been sent a confirmation email to the address you used to sign up. Click on the verification link to verify this address on GitHub.
Back on the GitHub website, click on the
Emails link in the panel at left. If you wish, you can add another email to use on GitHub, which will need to be verified as well. If you don’t wish to display your email on GitHub check the
Keep my email address private box.
Now click on the
Security link. I strongly recommend that you click on
Set up two-factor authentication to set up this important security feature for your account. It will require you to enter a six-digit code sent to your phone each time you sign on from an unfamiliar device or location.
At the next screen, click
Set up using SMS. Then enter your phone number, send a code to your phone and enter it where shown:
At the next screen click
Download and print recovery codes. These will allow you to get back into your account if you lose your phone. Do print them out, keep them somewhere safe, and delete the file.
Open the GitHub Desktop app. At the opening screen, click
Then add your GitHub login details:
You will then be sent a new two-factor authentication code which you will need to enter:
At the next screen, enter your name and email address if they do not automatically appear, click
Install Command Line Tools, and then
Done at the
Find local repositories screen, as you don’t have local repositories to add.
The following screen should now open:
Your workspace contains one repo, which is an automated GitHub tutorial. Complete this in your own time if you wish. It will repeat many of the steps we will explore today.
Back on the GitHub website, go to your profile page, click on the
Repositories tab and click
Fill in the next screen as follows, giving the repository a name and initializing it with a
README file. Then click
You should now see the page for this repo:
Notice that there is an
Initial commit with a code consisting of a series of letters and numbers. There will be a code for each commit you make from now on.
Clone or download and select
Open in Desktop:
You should now be sent to the GitHub Desktop app, where you will be asked where on your computer you wish to clone the repo folder. Choose a location and click
Now you should be able to see the repo in the GitHub Desktop app:
You should also be able to find the folder you just cloned in the location you specified:
It contains a single file called
README.md. This is a simple text file written in a language called Markdown, which we will explore shortly. You use this file to
write an extended description for your project, which will be displayed on the repo’s page on GitHub.
Add the file
index.html to the project folder on your computer. Notice that you now have
1 Uncommitted Change in GitHub Desktop.
Click on that tab, and you should see the following screen:
GitHub Desktop highlights additions from your last commit in green, and deletions in red.
Write a summary and description for your commit, then click
Commit to master:
Back in the
History tab, you should now see two commits:
So far you have committed the change on your local computer, but you haven’t pushed it to GitHub, To do that, click the
Sync button at top right.
Go to the project page on the GitHub website, refresh your browser if necessary, and see that there are now two commits, and the
index.html file is in the remote repo:
Back in GitHub Desktop, click on the new branch button at top left, and create a new branch called
You can now switch between your two branches using the button to the immediate right of the new branch, which will display either
test-branch. Do pay close attention to which branch you are working in!
Here I am working in the test branch, having made the edit below:
While in the
test-branch on Github Desktop, open
index.html in a text editor. Delete
<p>I'm a paragraph</p> and replace it with the following:
<h2>Hello again!</h2> <p>I'm a new paragraph</p>
Save the file, then return to GitHub Desktop to view the changes in the
Now switch to the
master branch and look at the file
index.html in your text editor. It should have reverted to the earlier version, because you haven’t merged the change in
Switch back to
test-branch in Github Desktop, and commit the change as before with an appropriate summary and description:
Pull request at top right and then
Send Pull Request:
You should now be able to see the pull request on GitHub:
Compare & pull request to see the following screen:
If another collaborator had made this pull request, you might merge this into
master online and then sync your local version of the repo with the remote to incorporate it.
However, you made this pull request, so
Close pull request and return to GitHub desktop. In the
master branch, click
Compare at top left. Select
test-branch and then click
Update from test-branch. This should merge the changes from
Make sure you are in the
master branch on GitHub Desktop, then view the file in your text editor to confirm that it is now the version you edited in
master branch on Github Desktop, make a branch called
In this branch, click the
Publish button at top right.
Now go to the GitHib repo page, refresh your browser if necessary, and notice that this branch now exists there:
Now go the the url
[username] is your GitHub user name, and the webpage
index.html should be online:
Markdown provides a simple way to write text documents that can easily be converted to HTML, without having to worry about writing all of the tags to produce a properly formatted web page.
Haroopad is a Markdown editor that we will use to edit the
README.md for our repos, and also author some text to add to a simple webpage.
Bootstrap is a web framework that allows you to create responsively designed websites that work well on all devices, from phones to desktop computers. It was originally develeoped by Twitter.
(I used Bootstrap to make this class website, writing the class notes in Markdown using Haroopad.)
README.md in Haroopad. The Markdown code is shown on the left, and how it renders as HTML on the right:
Now edit to the following:
# My first repository ### This is the repo we have been using to learn GitHub. Here is some text. Notice that it doesn't have the # used to denote various weights of HTML headings (You can use up to six #). And here is a [link](http://severnc6.github.io/my-first-repo) to the `gh-pages` website for this repo. *Here* is some italic text. **Here** is some bold text. And here is a list: - first item - second item - sub-item - third item
This should display in Haroopad like this:
See here for a more comprehensive guide to using Markdown.
README.md in Haroopad and close it.
With Github Desktop in the
master branch, delete
index.html from your repo, and copy into the repo the file
index2.html and the folders
You now have a template Bootstrap page with a navigation bar at the top. Open in a browser, and it should look like this:
The links in the dropdown menu are currently to pages that don’t exist, and the email link will send a message to me. Open in a text editor to view the code for the page:
Open a new file in Haroopad, edit to add the following and save into your repo as
# A Bootstrap webpage ### It has a subheading And also some text.
From the top menu in Haroopad, select
File>Export...>HTML and notice that it has saved as a webpage in your repo your computer.
We just want to take the text from the web page and copy it into our
index.html page. To do this, select
File>Export...>Plain HTML from the top menu in Haroopad, open
index.html in your text editor, position your cursor between immediately below the
<div class="container"> tag, and
⌘-V to paste in the HTML for the text we wrote in Haroopad.
index.html and view in your browser.
In GitHub Desktop, view the uncommited changes,
Commit to master and
Sync to GitHub.
Now switch to the
Update from master and
gh-pages branches should now be updated on GitHub:
Follow the link we included in the
README, and you’ll be sent to the hosted webpage, at
[username] is your GitHub user name.
W3Schools has a tutorial here, and Jeremy Rue has a tutorial here. The key to responsive design with Bootstrap is its grid system, which allows up to 12 columns across a page. This section of the W3schools tutorial explains how to use the grid system to customize layouts for different devices.
This site helps you customize a Bootstrap navigation bar.
There are various sites on the web that provide customized Bootstrap themes — some free, some not. Search “Bootstrap themes” to find them. A theme is a customized version of Bootstrap that can be used as a starting point for your own website. Jeremy Rue has also created a suggested portfolio theme.
In Markdown, write a pitch for your final project in a file called
project-pitch.md. Your final project accounts for 45% of your grade for this class, so it’s important that you get off to a good start with a substantial and thoughtful pitch. You will also be graded separately on this pitch assignment.
Using Haroopad, save the Markdown document as an HTML file with the same name.
gh-pages branch for your repository and publish it on GitHub. View the webpage at created at
[username] is your GitHub user name and
[project] is the name of your project repository.
Share that url with me so I can read your project pitch and provide feedback.
Getting Started with GitHub Pages
This explains how you can creates web pages automatically from GitHub. However, I recommend authoring them locally, as we covered in class.